QuickConveyor Logo
home |
modules_drawings |
products |
sales information |
Engineering |
Contact Information |
Bar
Conveyor Products
PRODUCT Q100 - GUIDE RAIL CLAMP KIT
Conveyor product info
   GUIDE RAIL CLAMP KIT
   GUIDE RAIL CLAMP KIT

view larger


APPLICATION NOTES:
Guide Rail Clips are used to attach guide rails to guide rail brackets.


  • One clip kit is required at each attachment point of guide rail to guide rail bracket. If two rails are used on each side of the conveyor, two clip kits are required for each top guide rail bracket.
  • Clip can be rotated 180 degrees on bracket.
  • The guide rail joint should be located on a guide rail bracket centerline so one clip clamps the ends of two guide rails.
  • Clip can be installed with bolt above rail or bolt below rail.
  • Clip kit can also be used to connect the ends of two guide rails not located on a guide rail bracket.
PARTS INCLUDED:
Part # Qty. Part Name
21 1 GUIDE RAIL CLAMP
16 1 5/16"-18NC SERRATED FLANGE NUT
26 1 5/16" FLAT WASHER
134 1 5/16-18NC x 7/8" HEX HEAD BOLT