APPLICATION NOTES:
Leg supports 24" drive or idle 20 1/2" from conveyor end.

• 24" drives and idles can use either this return shoe leg or an end Drive/Idle Leg Q194.
• Return shoe leg bolts to the return shoe attachment bolts. Return shoe leg supports the drive or idle 20 1/2" from the end of the conveyor.
• Return shoe leg is only used on the 2' drive or idle.
• Conveyor height to top of chain is adjustable between 36" and 41".
• Leg tube is 1 1/2" Sch. 10 stainless pipe.
• Leg tube can be cut for lower conveyor heights.
• Leg tube can be replaced for higher conveyor heights.
• Leg feet can be adjusted for uneven floors +/- 2".
• Leg feet are 3 1/8" diameter and have two holes for 5/16-18 NC bolts for floor anchoring.
• All parts required to bolt leg to conveyor are provided.