QuickConveyor Logo
home |
modules_drawings |
products |
sales information |
Engineering |
Contact Information |
Bar
Conveyor Products
PRODUCT Q153 - 180 DEGREE DISK CURVE GUIDE RAIL KIT
Conveyor product info
   180 DEGREE DISK CURVE GUIDE RAIL KIT


APPLICATION NOTES:
Kit designed for half round guide rails spaced on 2 1/2" centers.


  • Kit consists of 4 plates with GR clamp and spacers. Plates slide and clamp on lower half round guide rail.
  • Rail is 1/4" x 3" UHMW plastic.
  • Rail is fixed to the center guide rail bracket and slides on the half round guide rails at each end.
  • Half round guide rails to be cut overhang 7" into curve from end of curve.
  • Guide rails will adjust from 1" to 4" between rails.
  • Medium top GR brackets are recommended.
  • Top GR brackets, carriage bolts, guide rail clips, flat washers, and rachet handles are not included in the kit and need to be ordered separately.
  • Two 3/8" thick spacers are included for infeed to curve. They space the 1/4" x 3" guide rail so it is inside the half round guide rails.
  • Two 1/2" thick spacers are included for discharge of curve. They space the 1/4" x 3" guide rail so it is outside the half round guide rails.
PARTS INCLUDED:
Part # Qty. Part Name
63 4 SMALL GUIDE RAIL CLIP PLATE
158 8 SIDE SPACER
170 8 1" DIA. X 1/2" SPACER
217 1 DISK CURVE INSIDE GUIDE RAIL
218 1 DISK CURVE OUTSIDE GUIDE RAIL
225 4 8" R CURVE SPLICE PLATE
16 13 5/16-18NC SERRATED FLANGE NUT
19 4 5/16-18NC x 1/2" HEX HEAD BOLT
26 1 5/16" FLAT WASHER
206 9 5/16-18NC x 1" FLAT HEAD BOLT