8" RADIUS 90 DEGREE DISK CURVE

PRODUCT Q157 - 8" RADIUS 90 DEGREE DISK CURVE

view larger

APPLICATION NOTES:
Disk curves have two freely rotating disks to eliminate drag in the turn.

Disks can be installed to operate clockwise or counter clockwise.
Connector and bottom guide rail brackets are included at both ends.
Top guide rail brackets are not included.
Wearstrips are included.
Disk curve cannot bolt directly to 30" drive, 30" idle, transfer or curves. An 8" or longer straight must be installed between modules except for 24" drive or 24" idle. A 24" drive or a 24" idle can be bolted directly to a curve if the 2" sq. tube connector is removed.
If a leg is required, use Q107.
90º disk curve requires a Guide Rail Kit Q151.
Chain length required: 58"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	4	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
2	1	BOTTOM GUIDE RAIL BRACKET - 6 5/8" TWO HOLE
4	4	GUIDE RAIL SPACER
12	32	4" CURVE SIDE
29	2	1" BEARING BLOCK
42	28	WEARSTRIP
60	2	DISK
62	2	90 DEG.DISK CURVE CENTER WS SUPPORT
68	1	DISK CURVE SHAFT
86	1	TWO HOLE NUT PLATE
92	2	1" BEARING
95	1	90 DEGREE DISK CURVE SIDE
138	1	1" BORE PLASTIC CLAMP TYPE COLLAR
178	2	90 DEGREE DISK CURVE END TUBE
179	1	90 DEGREE DISK CURVE MIDDLE TUBE
180	32	3 3/8" MACHINED WEARSTRIP
183	2	DISK CURVE SHAFT SUPPORT PLATE
187	1	DISK CURVE SHAFT SUPPORT END PLATE
192	2	1" - 3 BOLT STEEL BEARING
197	4	DISK CURVE SIDE SUPPORT PLATE
198	1	3 BOLT STEEL BEARING COVER
219	2	DISK CURVE END WEARSTRIP #1
220	2	DISK CURVE END WEARSTRIP #2
223	2	DISK CURVE 90 DEGREE OUTSIDE WEARSTRIP
16	4	5/16-18NC SERRATED FLANGE NUT
18	2	5/16-18NC x 3/4" HEX HEAD BOLT
22	8	5/16" LOCK WASHER
26	8	5/16" FLAT WASHER
130	2	5/16-18NC x 5 1/2" HEX HEAD BOLT
147	6	5/16-18NC x 1 1/4" HEX HEAD BOLT
209	6	5/16" PRESS INSERT
234	2	5/16-18NC x 3" HEX HEAD BOLT