24" DRIVE - Part # Q158

PRODUCT Q158 - 24" DRIVE

view larger

APPLICATION NOTES:
Used to provide a drive at end of the conveyor.

Connector and bottom guide rail brackets are included at infeed end.
Gearmotor not included. Order Q161 or Q162 separately.
Includes hardware and mounting plate for gearmotor.
Drive can use either Drive/Idle Leg Q194 or 24" Drive/Idle Return Shoe Leg Q126.
Drive can be disassembled and reassembled to change gearmotor from right side to left side.
Top guide rail brackets are not included.
Wearstrips are included.
Removable 12 ga. deadplate is included at discharge end.
The 2" sq. tube connector is removable from the 24" drive. A curve, drive or transfer can be inserted into the drive after the connector is removed. A straight is not required between the 24" drive and other modules.
Chain length required: 48"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	2	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
3	2	BOTTOM GUIDE RAIL BRACKET - 9" TWO HOLE
4	2	GUIDE RAIL SPACER
7	1	DRIVE/IDLE CHANNEL SPACER - 3 1/4" CHAIN
13	1	HOUSING END - 3 1/4" CHAIN
15	1	DRIVE KEY
44	2	24" SIDE
46	2	RETURN SHOE
51	2	11/16" ONE HOLE SPACER
61	1	3" RETURN GUIDE BLOCK
90	1	880-11T-1" SPROCKET
93	1	HOUSING END DEADPLATE - 3 1/4" CHAIN
155	3.375	SS CHANNEL
158	3	SIDE SPACER
162	1	10 1/4" DRIVE SHAFT
180	21	3 3/8" MACHINED WEARSTRIP
182	1	HOUSING END BOTTOM PLATE - 3 1/4" CHAIN
192	1	1" 3 BOLT BEARING - STEEL
208	1	SS 20" DRIVE/IDLE TUBE
211	1	18" DRIVE/IDLE WEARSTRIP
226	10.25	1" KEYED SHAFTING
16	16	5/16-18NC SERRATED FLANGE NUT
18	4	5/16-18NC x 3/4" HEX HEAD BOLT
22	6	5/16" LOCK WASHER
26	13	5/16" FLAT WASHER
127	4	5/16-18NC x 1 1/2" HEX HEAD BOLT
128	1	5/16-18NC x 4" HEX HEAD BOLT
130	1	5/16-18NC x 5 1/2" HEX HEAD BOLT
131	7	5/16-18NC x 1" HEX HEAD BOLT
134	3	5/16-18NC x 7/8" HEX HEAD BOLT
209	6	PRESS INSERT
234	2	5/16-18NC x 3" HEX HEAD BOLT