30" RIGHT TO LEFT TRANSFER

PRODUCT Q187 - 30" RIGHT TO LEFT TRANSFER

view larger

APPLICATION NOTES:
Transfers include a drive and an idle in one housing.

Straight connectors and bottom guide rail brackets are included at both ends.
Gearmotor not included. Order Q161 or Q162 separately.
Includes hardware and mounting plate for gearmotor.
Top guide rail brackets are not included.
Wearstrips are included.
Requires two Drive/Idle Legs Q194.
The gap between chains is 1/8".
Transfer cannot bolt directly to curve, 30" idle, 30" drive or transfer. An 8" or longer straight must be installed between modules. A 24" drive or idle can bolt directly to a transfer if the 2" sq. tube connector is removed.
Chain length required: 120"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	4	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
3	2	BOTTOM GUIDE RAIL BRACKET - 9" TWO HOLE
4	4	GUIDE RAIL SPACER
13	2	HOUSING END - 3 1/4" CHAIN
15	1	DRIVE KEY
25	1	IDLE KEY
29	2	1" BEARING BLOCK
51	8	11/16" ONE HOLE SPACER
55	4	12" RETURN SHOE
59	2	SS 26" DRIVE/IDLE TUBE
61	2	3" RETURN GUIDE BLOCK
90	2	880-11T-1" SPROCKET
92	2	1" BEARING
93	2	HOUSING END DEADPLATE - 3 1/4" CHAIN
102	2	30" SIDE
119	2	24" DRIVE/IDLE WEARSTRIP
142	1	THRANSFER CHANNEL SPACER - 3 1/4" TO 3 1/4"
155	6.75	SS CHANNEL
157	2	VERTICAL TRANSFER PLATE
158	11	SIDE SPACER
160	1	5" IDLE SHAFT
161	1	8 3/4" DRIVE SHAFT
170	2	1" DIA. x 1/2" SPACER
180	54	3 3/8" MACHINED WEARSTRIP
182	2	HOUSING END BOTTOM PLATE - 3 1/4" CHAIN
192	1	1" 3 BOLT BEARING - STEEL
226	13.75	1" KEYED SHAFTING
16	20	5/16-18NC SERRATED FLANGE NUT
18	10	5/16-18NC x 3/4" HEX HEAD BOLT
22	10	5/16" LOCK WASHER
26	14	5/16" FLAT WASHER
128	4	5/16-18NC x 4" HEX HEAD BOLT
130	2	5/16-18NC x 5 1/2" HEX HEAD BOLT
131	3	5/16-18NC x 1" HEX HEAD BOLT
133	6	5/16-18NC x 3 1/2" HEX HEAD BOLT
134	3	5/16-18NC x 7/8" HEX HEAD BOLT
209	12	PRESS INSERT
234	4	5/16-18NC x 3" HEX HEAD BOLT