30" FLUSH LEFT DRIVE - Part # Q192

PRODUCT Q192 - 30" FLUSH LEFT DRIVE

view larger

APPLICATION NOTES:
Drive is smooth on left side to allow drive to bolt to another conveyor.

Straight connector and bottom guide rail brackets are included at infeed end.
Gearmotor not included. Order Q161 or Q162 separately.
Includes hardware and mounting plate for gearmotor.
Left side is clear to allow drive to be bolted to machine conveyor. Two 5/16-18 NC tapped holes and one 3/8" hole are provided in the flush side.
A 12 ga. flush side angle support is provided at discharge end.
Top guide rail brackets are not included.
Wearstrips are included.
A Drive/Idle Leg Q194 can be bolted to drive end if required.
Drive cannot bolt directly to curve, 30" idle or transfer. An 8" or longer straight must be installed between modules except for 24" idle. A 24" idle can be bolted directly to a drive if the 2" sq. tube connector is removed.
Chain length required: 60"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	2	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
3	2	BOTTOM GUIDE RAIL BRACKET - 9" TWO HOLE
4	2	GUIDE RAIL SPACER
7	1	DRIVE/IDLE CHANNEL SPACER - 3 1/4"
11	1	FLUSH SIDE ANGLE SUPPORT
13	1	HOUSING END - 3 1/4" CHAIN
15	1	DRIVE KEY
29	1	1" BEARING BLOCK
51	1	11/16" ONE HOLE SPACER
55	2	12" RETURN SHOE
59	1	SS 26" DRIVE/IDLE TUBE
61	1	3" RETURN GUIDE BLOCK
90	1	880-11T-1" SPROCKET
92	1	1" BEARING
93	1	HOUSING END DEADPLATE - 3 1/4" CHAIN
102	2	30" SIDE
119	1	24" DRIVE/IDLE WEARSTRIP
155	3.375	SS CHANNEL
158	7	SIDE SPACER
161	1	8 3/4" DRIVE SHAFT
180	27	3 3/8" MACHINED WEARSTRIP
182	1	HOUSING END BOTTOM PLATE - 3 1/4" CHAIN
226	8.75	1" KEYED SHAFTING
16	10	5/16-18NC SERRATED FLANGE NUT
18	6	5/16-18NC x 3/4" HEX HEAD BOLT
22	11	5/16" LOCK WASHER
26	11	5/16" FLAT WASHER
129	2	5/16-18NC x 3 1/4" HEX HEAD BOLT
130	1	5/16-18NC x 5 1/2" HEX HEAD BOLT
131	5	5/16-18NC x 1" HEX HEAD BOLT
133	1	5/16-18NC x 3 1/2" HEX HEAD BOLT
137	2	5/16-18NC x 3/4" FLATHEAD SCREW
209	6	5/16" PRESS INSERT
234	2	5/16-18NC x 3" HEX HEAD BOLT